Our References

Tyring Machine

Drive SSD (STIP 1995) replace old perforated card by a new system of acquisition using PC, on 20 machines.
Automatic Coil Up (STIP 1995), with CEGELEC ALSTOM PLC.
Revamping 10 Vulcanization Presses (STIP2001-2006) , with SIEMENS SIMATIC S7-300 PLC’s And OP7 HMI.
Revamping 11 Vulcanization Presses (SIOK2002) , with SIEMENS SIMATICS S7-200 PLC’s and OP3 HMI.
Revamping a Quality Test machine (STIP 2004): Supervising using siemens software WinCC , and SIMATIC S7-300 PLC.
Controlling temperature of 12 Presses, Using siemens SIMATIC S7 PLC( STIP2005).

Mechanical and Wiring Car Industry

Conception and manufacturing of an acquisition system and Force Analysis (1997- Ministry of National Defense)
Development of a complete automatism with a SIEMENS PLC SIMATIC S7-300 for a machine that makes rods of tires , using OP7 SIEMENS HMI (1998 – STIP )
Revamping an automatic PVC pipe-manufacturing machine, using SIMATIC SIEMENS PLC with HMI OP7. ( 1999 – MTPC Plastic company)
Conception and manufacturing of An Electronic system, using laser sensor to measure the diameter of electrical cables (1999 – LEONI Germany company)
Revamping 2 Plastic injection machines, on base of SIMATIC SIEMNS PLC S7-300.
Conception and manufacturing of 12 new chains of production based on mobile robots and bundles of car cable - EFFALINE solution – (2003 / 2004 LEONI Germany Company)

Dough processing (UNPA – 2002 ) Conception 2 Load/Unload Installation of 32 stores , using SIMATIC S7-300 PLC and HMI TP177.
Revamping 5 Packaging salt Machines using simatic siemens S7-300 PLC (2002 – 2007 COTUSAL ).
Migration of milk sterilizer replacing SIMATIC S5 CPU 135 by CPU SIMATIC S7 3152DP And HMI OP17 By TP170B ( CLM VITALAIT – 2006).
Revamping 10 palletizing - depalletizing and packing – unpacking machines using
SIMATIC SIEMENS PLC CPU S-300 And OP7 HMI ( SFBT Group 2003 – 2007).
Automation of CIP installation in brewery SEABG S7/WinCC 2048 Tag.
Regulation of temperature by means of valves regulating 24 tanks of finished produced storage, using SIMATIC SIEMENS CPU S7-300 and supervision PC having WinCC SIEMENS (SFBT Group 2005 ).
Automation of milk sterilizer capacity 16000 L- 8000 L by means of SIMATIC SIEMENS PLC CPU S7-3152DP and TACTILE HMI SIEMENS (SLD BELDI – 2005 ).
CIP installation in Milk manufacture using S7/WinCC Flexible, SIMATIC SIEMENS PLC 315 2DP and TACTILE HMI SIEMENS (SLD BELDI – 2006 ).
Line Work conveyor (SFBT SFAX COCA COLA GROUP ) Using PLC SIMATIC SIEMENS S7-300 and supervisor with industrial PC and WinCC Flexible.
Temperature control of 18 Beer Tanks (SFBT TUNIS) Using PLC SIMATIC SIEMENS S7-300 and supervisor with industrial PC and WinCC Flexible.
Temperature and Pressure control of 5 Beer Tanks (SFBT TUNIS) Using PLC SIMATIC SIEMENS S7-300 and supervisor with industrial PC and WinCC Flexible.

Automation, regulation and security control of a gas conveyor of pre-heating cement kiln (cement factory CIOK Tajerouine 2007) using SIMATIC SIEMENS CPU 412 & ET 200M, HMI OP270 and supervisor control with industrial PC equipped with WINCC FLEXIBLE
Automation of a concrete Central (BCE – 2007 ) using SIMATIC SIMENS S7 300 PLC and /WinCC Flexible Runtime, with listing of used Recipe and dosage efficiency.
Automation on base of SIEMENS PLC of a cage production machine (BONA – BETON 2004 )
Automation of 4 20-Ton porticos (ELKANAOUET – 2001- 2002 )
Automation of 4 tile-producing machines by means of SIMATIC SIEMENS S7 300.
Automation of 2 marble-cutting machines by means of SIMATIC SIEMENS S7 300 and encoders.

Automation of a mixer of drug products ( ADHELS 2006) using S7 300 and HMI TP170 TACTIL.
Automation of 2 plastic flask- producing machines (UNIMED 2006) using SIMATIC SIEMENS PLC S7 300 and HMI OP7 .
Automation and regulation of a factory-waste-treatment installation (SELECTA GROUP POULINA 2005) by means of SIMATIC SIEMNS S7 200 And HMI OP3.

Conception and manufacturing of an electronic intelligent SSD reader replacing a classic punched paper tape reader on 20 Tyre-producing machines ( STIP 1995 )
Conception and manufacturing of a data acquisition chain controlled by a PC settled on a classic test-flexibility press of a blade spring (COLMAR 1995 ).
Conception and manufacturing of an automatic controlling system of reel sides (STIP – 1996) using SIMATIC SIEMENS S7.
Conception and manufacturing of an automatic controlling inflation and deflation system on a tyre-producing machine (STIP – 1996 ) using PLC CEGELEC ALSTOM.
Conception and manufacturing of an automatic bi-dimensional controlling system of a machine of tyres in section (STIP- 1997 ) using PLC CEGELEC ALSTOM.
Automation and installation of an automatic controlling system of quality and uniformity on a tyre-controlling machine “PNEUCAL” (STIP – 1997 ) using HBM Cell loads and acquisition system CATMAN HBM.
Conception and installation of a digital network of temperature recorders on 12 vulcanization presses by means of an industrial supervision PC and DELPHI software.
Automation and supervision of uniformity on a tyre-controlling machine (heavy weight vehicles) (STIP-2004) using SIMATIC SIEMENS S7 300 and WINCC.
Revamping of 9 Vulcanization presses (STIP M BOURGUIBA 2001-2005) by means SIMATIC SIEMENS PLC S7 300 and HMI OP7, replacing classic SHNEIDER PLC’S.

Automation and regulation of a thermal-treatment kiln of mechanical pieces for aeronautic industries “9 measure chains” (P&K AMERICAN FIRM 2005) by means of SIMATIC SIEMENS PLC S7 200 And HMI TP177.
Conception and installation of a 12-thermocouple data acquisition for thermaltreatment kiln equilibrium (P&K AMERICAN FIRM 2006) by means of SIMATIC SIEMENS PLC S7 300 And HMI industrial PC with WINCC FLEXIBLE.